Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 27 hp, 2012.

AimThe aim of this study was to develop and perform a reliability test of a questionnaire regarding side dominance in order to identify the dominant/non-dominant side in students at the Swedish alpine ski high school.MethodA questionnaire of side dominance of the upper and lower extremity was developed, and its reliability was tested according to the test-retest design. A total of 121 subjects answered the questionnaire twice. The questionnaire included five questions about side dominance, i.e. what hand/arm or foot/leg (left /right) that one prefers to use as a first choice when writing, throwing, kicking a ball, jumping over a fence and stair climbing. Furthermore, there was a question whether the responder has a safer/better ski turn to the left or to the right.

St. Jude Medical Inc is one of the worlds leading companies in the medical technology area with cardiovascular devices as its specialty.Manufacturing implantable medical devices such as Pace Maker Electrodes requires complex design, safe processes and well trained operators. User friendly manufacturing operations are a necessity.Lately there?s been an increase of the manufacturing volume which also increased the number of operators. More operators need to be trained and cross-trained.

Together with Hälsoteknikalliansen the project team recognized the need to improve availability in the staircase environments. This is a difficult environment, especially for our elderly. The staircase leading to and from apartments is such a major obstacle that many people do not dare to go into the staircase leading to their front door. The market study that the project team conducted showed that many were in need of a living support, often a relative, who helped and supported them when they went into these stairs. It also appeared that these people manage everyday life just fine, but they suffer the problems that stairs to and from their apartment causes.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The project explores the possibilities of using additive manufacturing (3d-printing) to build architecture. Through a combination of theoretical research and practical experiments a building system has been developed which has the capabilities to create houses with great geometric flexibilities to a affordable price today. The construction system Perimeter is demonstrated in a pavilion situated at Norra Djurgården in Stockholm. .

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

In this paper we have studied possible future uses for Additive Manufacturing (commonly referred to as 3D-printing) in Space. More specifically we have sought to establish how Additive Manufacturing can be used to construct structures on the Moon. Our studies have shown that Additive Manufacturing has great potential for establishing colonies on not only the Moon, but perhaps even further away from our home planet. With Contour Crafting-technology in combination with ISRU (In Situ Resource Utilization) we could, with material already present in the sediment layers of the Moon, construct advanced structures without having to transfer any extra material from Earth. This would lower the costs of establishing a colony on the Moon to such extents that it could actually be fiscally possible..

At a manufacturing company, due to the competition the price is reducedtowards the manufacturing cost. Therefore it is important to maintain control ofones costs and keep calculations up-to-date.This thesis deals with cost accounting at a aluminium-processing company. The report focuses on calculating machine cost per hour since the manufacturing costs are the major part of the total product cost.Managers on the company believe that the costs they use in calculations todayneither is up-to-date nor advantageous in a market aspect and due to that their calculations need to be revised. The machines cost per hour is a major part in the manufacturing calculation. The company wants to provide a competitive price that also covers their costs.

The thesis investigates if it is possible to replace several pumpimpellers with one controllable pumpimpeller, with a economical and a manufacturing analisys aspect. The studied pumpimpeller is mounted on a midrange wastewaterpump, N3127MT.In the thesis a contemplated manufacturing process is evaluated for a concept that are supposed to act as a controllable pumpimpeller. The pumpimpeller are studied in a manufacturing and flow matter and are presented in the thesis.The manufacturing cost is also estimated, and this has been compared to the storage cost and other costs that the existing pumpimpeller generates.The thesis also shows that the concept has minor losses in cutting quality aswell as the effiency comparing to the existing pumpimpeller.The concept also raises the manufacturing cost and this increasing cost makes the presented concept to expensive to carry through.An investigation of the costs that the existing pumpimpeller produces has also been done, and this shows that there is not that much expenses to earn regarding to for example the storage cost. The storage cost includes information from Flygt?s central storagecenter in Lindas, Sweden and Metz, France, and also an inventory about the pumpimpellers located at Flygt?s different distributors worldwide.The thesis shows that a controllable pumpimpeller will generally increase the cost for the pumpimpeller and the performance of the pumpimpeller will decrease..

Background: Resources that are hard to put a value on and cannot be classified as assets in the balance sheet as well as the development towards the information society has led to an increasing need and use for voluntary information in the annual reports. The increase of voluntary information can foremost be seen in the field of human resources.Purpose: The purpose of this thesis is to describe the development of voluntary information about human resources in the annual report of a number of Swedish quoted companies. The purpose is also to see if there is a difference in the development between manufacturing companies and service companies.Method: Six manufacturing companies and six service companies were chosen from the Stockholm exchange A-list. Using both a qualitative and quantitative research method the annual reports of the chosencompanies were studied for the years 1995, 1997, 1999, 2001, and 2003. A model consisting of seven categories; health, diversity, recruitment, staff turnover and comfort, benefits and motivation, education and competence development, was developed to clarify were the development took place.Conclusions: After finishing the study one can tell that the amount of voluntary information about human resources in the annual report has increased even though the percentage share of the total annual report only has increased appreciably for manufacturing companies.

The Swedish automotive industry has since way back been struggling with bankruptcy, abroad buy outs and staff cuts. Competition and pressure on prices are two factors that affect the automotive industry. Because of this, the companies are pressured to continuously developing their work in addition to be able to compete on the market. The aircraft industry has successfully managed to implement additive manufacturing (AM) and for motorsport has several components manufactured with AM been used. When AM is used as a manufacturing method, there are a number of advantagesthat follows.

The female labour is still a rather unexploited resource in many parts of the world. Unleashing women?s potential, giving them the possibility to start their own enterprises would increase the economic growth. Not only does women's entrepreneurship foster greater equality in the world but it also creates a more versatile economy. Sweden is considered to be one of the most equal countries in the world; still, entrepreneurship is an area with sharp gender differences, especially in some industries.

Upon marketing the system in Europe and the USA cost savings generated from reduced work force have been prevailing. Since the cost of labour is much lower in the Asia Pacific region other factors have to be stressed. The parameters of flexibility and quality assurance may however cover any initial investment in a production system. Our purpose is to value flexibility and quality in a manufacturing context, applied to DAS, in order to use it in investment calculations. In order to make an adequate estimation of different companies, due to problems associated with acquiring correct figures, the Key Success Factors needs to be examined so that the gathering of numbers can be conducted with more focus.